- Wire rope sling usage method
1. The part easily be damaged on the sling is the connected part with the rope and hooks, links or shackles, which can be protected by the sleeve.
2.When the wire rope sling used over the corner or tip parts, the wire rope will break and the core will appear, to protect them please use the protective corner.
2.When the wire rope sling used over the corner or tip parts, the wire rope will break and the core will appear, to protect them please use the protective corner.
3. As mormally, if the customers do not have require, the nature eye length is 2 times of the eye width, if the width much too large, the aluminium ferrule will be break off when it is loading weight, it will be very dangerous. It sould make the rope rack longer, it is better that the eye lenght is not less tahn 3 times to the eye width.
4. Before using the sling, it should have a test (when having the test, the distance of the loaded goods from the ground is less than 200mm), the choice for the liftin point should be on the same line with the center of gravity.
5. Wire rope slin loading intensity factor the map of the lifting angle is following:
5. Wire rope slin loading intensity factor the map of the lifting angle is following:
Notice for the wire rope sling:
1 Befor using the sling, note the WLL and applied range,overload forbidden.
2 When using the whole set of sling, it should be put on the load
center of the hook, hang tip of the hook is forbidden.
3. When liffting with whole set of the sling, avoid the lifting angle
over 60.
1 Befor using the sling, note the WLL and applied range,overload forbidden.
2 When using the whole set of sling, it should be put on the load
center of the hook, hang tip of the hook is forbidden.
3. When liffting with whole set of the sling, avoid the lifting angle
over 60.
4. When using tow sling together, please put the sling to the double hook, the tow slings separately put the bear load center position. When using four slings together, evry tow slings put into the double hook, pay attention that the tow slings can not be wrapped, the four slings should put on the bear load center position of the hook, showing on the map following:
5.Forbidden the sling knotting, and the steel wire rope can not connect directly, please separate them by shackles or links.
6.If hearing any unnormal noise when the rope is loading, it should stop the woring, and dealit after the inspection of the professional people.
7. Please keep steady when the sling under lifting. Forbidden the people stand under the lifted object.
8. Avoid the pressed sling bended to load during the installing, transferring and using for the sling.
7. Please keep steady when the sling under lifting. Forbidden the people stand under the lifted object.
8. Avoid the pressed sling bended to load during the installing, transferring and using for the sling.
