- Guidelines for textile sling
1. Oveload is forbidden.
2. When the textile slings are in use, put the slings on the hook, each sling should be in the center of each hook. When 4 slings are working together, put 2 of them in the hook, pleasenote that there should be no overlapping and press each other.
3. Please avoid circling on sling when in use.
4. Please avoid hanging the sling on the tip of hook.
5. Intercrossing, retortion, knot are forbidden during the lifting. Please adopt correct sling accessories.
4. Please avoid hanging the sling on the tip of hook.
5. Intercrossing, retortion, knot are forbidden during the lifting. Please adopt correct sling accessories.
6. When loading goods with tip, protectors should be taken to help sling extend the life. It is prohibited to use the sling on the rough surface in case of being damaged by the surface.
7. Double binding is safer.
7. Double binding is safer.
8. When loading gods with tip, protectors should be taken to help the sling extend the life. It is prohibited to use the sling on the rough surface in case of beging damaged by the surface.
9. Double bind safer.
9. Double bind safer.
10. Correct lifting type should be taken when lifting pipes etc. There will be danger if the angle is large.
11. The should be no pressure on the sling as it will damage the slins. Please don’t taket the sling out from the bottom as it is dangerous. The objects should be lifted up and take the sling out when there is enough space.
12. Please do not tug the sling on the rought
12. Please do not tug the sling on the rought
13.Please choose correct storage after use.
- Guidelines for the slings in set
1. No overload.
2. When lifting goods, no crossing, binding, or knoting.
3. The lifting angle should be less than 60 degrees.
- Don’t use the silngs if:
1. There are sever scratch, cutting, loose of strands, and break locally. The slings should be rejected.
2. There are severe abrasion, transformation, the abrasion is 10% of its original thickness. The slings should be rejected.
3. When there is aging (become fading), roughness on the surface, flake of the synthetic fiber, dwindling of elastic, dwindling of tensity. The slings should be rejected.
4. When there is musty on the slings, fired by acid, or adust by fire, loose on the surface. The slings should be rejected.
2. There are severe abrasion, transformation, the abrasion is 10% of its original thickness. The slings should be rejected.
3. When there is aging (become fading), roughness on the surface, flake of the synthetic fiber, dwindling of elastic, dwindling of tensity. The slings should be rejected.
4. When there is musty on the slings, fired by acid, or adust by fire, loose on the surface. The slings should be rejected.
- Ratchet strap
1. Ratchet straps can not be used for lifting.
2. When binding and bolting, the fixed object must be taken into consideration and choos the right ratchet straps.
3. Ratchet straps could not be used with visibile defaced parts.
2. When binding and bolting, the fixed object must be taken into consideration and choos the right ratchet straps.
3. Ratchet straps could not be used with visibile defaced parts.
4. Acrossing, turning, knoting screwing are not allowed during using.
5. Ratchet straps should be under stress evenly when several ratchet straps being used together.
6. Serious disrepair ratchet straps are not allowed to be used; Protecting cover must be used if there is any sharp edge or corner.
7. If is not fixed for the firdt time, release the ratchet straps with pin clips,
and fix it again.
8. When releasing, make sure stability of object steady, to prevent object
being slipped.
6. Serious disrepair ratchet straps are not allowed to be used; Protecting cover must be used if there is any sharp edge or corner.
7. If is not fixed for the firdt time, release the ratchet straps with pin clips,
and fix it again.
8. When releasing, make sure stability of object steady, to prevent object
being slipped.
- Assambly should be replaced or rejected in case of one of the following circumstances
1. Assambly should be rejected if the belt is cut,hurt serious.
2. Assambly should be rejected if the surface is frayed seriouslly or belt distorted or belt lenght is as big as 1/10.
3. Syntetic fiber should be rejected if intenerated or aging, surface turned coarseness, shelled, elasticity monished, intension weaken.
4. Ratchet straps should be rejected if moldy, acid-alkali burned, heat-melted, scorch or surface turned loosened.
4. Ratchet straps should be rejected if moldy, acid-alkali burned, heat-melted, scorch or surface turned loosened.
5. Metal attachment hurts so seriously with distortion that can not be used.
6. Metal attachament are rusted so seriously that the intension is affected.
6. Metal attachament are rusted so seriously that the intension is affected.
